Allied Marine logo

2019 27 ft

$ 256,851
Tacoma, WA, US


This is a sister ship - similar

This listing is for a new build twin currently under construction. The vessel can be configured to buyers options. Which will change the price up or down. Contact broker or builder for details.


  • Full Lifetime Hull Warranty
  • All-inclusive package includes paint, bottom 'BlueSeal' vinyl ester coating, aluminum I-beam trailer, outboards, electronics, lots of custom gear.
  • DINETTE that folds into a bed port side
  • GALLEY including stove and fresh water sink starboard
  • HEAD Stand up marine head aft port cabin with holding tank and Y valve
  • HEATER / Furnace (4D) Planar diesel / custom aluminum external tank
  • Length Overall 27'  /  Beam 8'6"   /   Draft 16"
  • Deep vee bow design for extremely smooth ride. Dead rise 20 degrees at transom
  • Towing weight wet 7,500lbs (Includes Trailer)
  • Trailer weight 1,300lbs
  • 1/4" bottom alloy 5086H116
  • 3/16" sides alloy 5052H32
  • 3/8" center vertical keel stem to stern with breast hook construction
  • Self bailing decks, welded and water diverted overboard, not into bilge.  Decks slope downward and back slightly for self bailing feature.  Dry bilge design concept w/ threaded drain hole and dual bilge pumps for safety
  • Below deck fish boxes with macerator pumps
  • Finished cabin interior with custom African Sapele trim, custom Bentley's ballistic nylon fabric
  • Cuddy bed covered in marine vinyl Whisper Charcoal
  • Bed is 7' long sleeps two
  • Storage compartments large below deck in several locations
  • Captains chair custom Bentley bolstering ballistic nylon w/ Seaspension helm chair
  • 360 degree visibility from helm / cabin sliding door by DSG
  • Cockpit depth 32" enclosed gunwale w/ no step down into cabin
  • Cabin headroom 6'4" at stand-up helm, 7' in cabin
  • Aft helm installed with steering, engine controls and shore power plug
  • LED Flood light in cockpit
  • Kicker Bracket Welded Port Swim Platform
  • Gasoline 140 gallons between dual 3/16" thick tanks
  • Water Separator/Gas Filter
  • Wash down (raw water) Johnson pump w/ thru hull ball valve
  • Bait station in transom drains directly overboard
  • Generator locker in transom with closing lid
  • Hand rails all welded with doubler plates
  • Welded trim tab doubler plates
  • Welded transducer bracket (external of transom so no thru bolts)
  • Welded zinc bracket (external of transom so no thru bolts)
  • Welded/threaded drain plug


  • Dual horns (SeaDog)
  • Dual multi-speed AFI wipers w/ independent switching
  • Dual 900gph bilge pumps
  • BlueSea electrical bus (+) and (-),
  • BlueSea battery switches
  • Individual battery health gauges
  • Battery Switch / Master battery switch at helm (BlueSea)
  • Additional house Master battery switch at main panel (BlueSea)
  • Dual USB Smart Phone Chargers / 12v Chargers (BlueSea)
  • Three Interstate G27 batteries
  • LED Flood Light forward
  • 12 welded rod holders
  • Xtreme below deck bilge heater
  • Custom Teak Cabin Roof
  • Custom Teak Interior Finishes

Boat is designed with easy access to electrical and plumbing. Pumps, electrical runs and terminations, gas system and tanks, are easily accessible for long term maintenance.


  • Twin Suzuki DF175AP with Aft Steering Helm


  • Garmin 7610xsv Smartchart with SideVü, ClearVü and Traditional CHIRP Sonar with Mapping capabilities (boat comes standard with GT51M-TM)
  • Johnny Ray™ Pedestal for quick connect
  • Garmin 18xHD radar dome
  • Garmin GT51 (chirp style) DownVu™ transducer
  • SIMRAD RS35 VHF with AIS and DSC & 8' antenna


  • Anchor Winch: Lone Star GX4
  • Pot Puller Electra-Dyne ED7500-10 XXHD SS
  • 32# Bruce Anchor w/ 600' 1/2" line and 25' Chain
  • Four fenders, four dock lines, four life jackets, USCG approved noise maker, boat hook, flares.


  • Heavy Duty Karavan aluminum I-beam w/dual axle electric over hydraulic brakes
  • Surge protected disc brakes, LED lighting, bunk w/ carpet



Price $ 256,851 USD
Year 2019
Length Overall 27 ft
Draft 1.33 ft (Max)
Beam 8.5 ft
Location Tacoma, WA, US
Hull Material Aluminum


Engine 1
Engine Location Port
Fuel unleaded
Engine Make Suzuki
Engine Model DF175AP
Model Outboard
Engine Year 2017
Engine 2
Engine Location Starboard
Fuel unleaded
Engine Make Suzuki
Engine Model DF175AP
Model Outboard
Engine Year 2017

Additional Information

About Xtaero Boats

The comfort and safety of the Xtaero Boat is unlike anything on the market.

Xtaero boats are made by hand in a specially outfitted factory using advanced hull form technology that has significant advantages over traditional custom aluminum builds.  The Xtaero hull design and shape is proprietary and results in a superior hydrodynamics performance where it counts.

Each aluminum part precisely interlocks with adjacent parts, in fact each piece of the Xtaero is designed using curved vectoring instead of straight line vectoring, this is noteworthy because curved vectoring allows the flat surface of the aluminum sheet to be formed into complex shapes and the end result is a hull form with development very similar to fiberglass hull forms. 

The Xtaero is that high performance hull shape, made from aluminum, that is the hull shape people have been asking for.

Because of this, Xtaeros are capable of, and known for, smooth ride at high speeds in rough water.  The overall vessel design provides ergonomic comfort because space is simple and elegant.  One of the most notable features is the 360 degree visibility from everywhere with no ducking, and there is no ducking or crouching required to get in and out of the cabin. 

In addition the welded self bailing decks, the stable side to side stability when floating in the trough and the rugged welded construction make the Xtaero a unique high quality and high performance boat.


This vessel has to large aluminum gas tanks. 96 gallon and 56 gallon with total usable 138 gallons. Fuel system includes carbon canister vapor filters that are EPA certified.


This vessel is configured for twin outboards.  This price includes twin Suzuki DF175AP (25" shafts) and counter rotating stainless propellers. Optional engines include Yamaha and 150hp up to 225hp.  Contact factory or broker for more information and options.



This listing is for a semi-custom build-to-order vessel. Purchasing the vessel will require a detailed specifications sheet and an Agreement for Manufacture and Sale of a new vessel.  Breakwater Marina offers the details of this vessel in good faith but cannot guarantee or warrant the accuracy of this information nor warrant the condition of the vessel.  A buyer should instruct his agents, or his surveyors, to investigate such details as the buyer desires validated. This vessel is offered subject to prior sale, price change, or withdrawal without notice.


Allied Marine is pleased to assist you in the purchase of this vessel. This boat is centrally listed by Breakwater Marina Yacht Sales.